Filed under: Featured, Marine Amplifiers

Alpine PDX Series Marine Amplifiers

by Marine Audio Pro on Dec 7th, 2009

Tags Share Comments (0)

Alpine PDX-1.600m - Alpine PDX-4.100m

Alpine produced a solid marine amplifier with the PDX series. These amplifiers are developed for the marine environment and are state of the art. All components in the PDX series are enclosed in weather resistent casings, the power output is strong and consistent, and the compenets are insulated to reduce outside noise. The features of this amplifier set it a part from the common.

 

Alpine PDX-4.100M

Sometimes size doesn't matter. You get big power from a little box with Alpine's Power Density Digital Amplifiers. Super-efficient Class-D technology allows these small-but-mighty amplifiers to run so cool they can be stacked together for a sweet multi-amp setup, freeing up valuable space on your boat.

The PDX-4.100M 4-channel amplifier supplies a full 100 watts to each channel, plenty of power for even the most demanding component speaker systems. Switch to 2-channel mode, and you can send 200 watts to each of your subwoofers. Weather-sealed internal components and clever engineering keep the power output strong and the noise low for superb fidelity and control. Adjustable frequency filters tailor the amp's output to your specific system.

Front-mounted controls make post-installation adjustments a snap. Gold-plated RCA inputs and power connections resist corrosion and signal degradation. Nifty speaker wire plugs ensure a tight connection and guarantee that your speakers play in unison.


Details:

  • 4-channel marine amplifier
  • specially coated and sealed for the marine environment
  • 100 watts RMS x 4 at 4 ohms (100 watts RMS x 4 at 2 ohms)
  • 200 watts RMS x 2 in bridged mode (4-ohm stable in bridged mode)
  • CEA-2006 compliant
  • stackable installation design with front-panel controls
  • variable high- and low-pass filters (30-400 Hz, 12 dB/octave)
  • quick-connect speaker connectors
  • Class-D amplifier design
  • MOSFET power and output stages
  • fuse rating: 30A x 2
  • 4-gauge power and ground leads recommended — wiring and hardware not included with amplifier
  • 10-3/16"W x 2-1/2"H x 8-7/8"D
  • warranty: 1 year

Alpine PDX-1.600m

Sometimes size doesn't matter. You get big power from a little box with Alpine's Power Density Digital Amplifiers. Super-efficient Class-D technology allows these small-but-mighty marine amplifiers to run so cool they can be stacked together for a sweet multi-amp setup, freeing up valuable space on your boat.

The PDX-1.600 mono amplifier supplies a whopping 600 watts of power from its amazingly compact body, plenty of punch for most sub systems. Beefy internal components and clever engineering keep the power output strong and the noise low for superb fidelity and control. The adjustable low-pass filter tailors the amp's output to your specific system.

Front-mounted controls make post-installation adjustments a snap. Gold-plated RCA inputs, outputs, and power connections resist corrosion and signal degradation, and its special marine coating makes it fit for a life at sea. Nifty speaker wire plugs ensure a tight connection and guarantee that your speakers play in unison.


Details:

  • marine mono subwoofer amplifier
  • specially sealed against the elements for use in the marine environment
  • 600 watts RMS x 1 at 4 ohms (600 watts RMS x 1 at 2 ohms)
  • CEA-2006 compliant
  • stackable installation design with front-panel controls
  • variable low-pass filter (50-200 Hz, 24 dB/octave)
  • switchable subsonic filter (15 or 30 HZ)
  • quick-connect speaker connectors
  • preamp-level inputs and outputs
  • Class-D amplifier design
  • MOSFET power and output stages
  • fuse rating: 20A x 4
  • 4-gauge amp wiring kit with 80-amp fuse recommended — wiring and hardware not included with amplifier
  • 10-3/16"W x 2-1/2"H x 8-7/8"D
  • warranty: 1 year
alpine amplifier PDX 2.150 alpine amplifier PDX 2.150 Paypal 11 Bids US $91.00 1h 8m
NEW ALPINE PDX1.600 MONO CAR AMPLIFIER AMP PDX-1.600 NEW ALPINE PDX1.600 MONO CAR AMPLIFIER AMP PDX-1.600 Paypal US $319.95 3h 56m
PDX-4.150 ALPINE DIGITAL 4 CHANNEL 600 W AMPLIFIER +FRE PDX-4.150 ALPINE DIGITAL 4 CHANNEL 600 W AMPLIFIER +FRE Paypal US $489.00 8h 47m
New Alpine PDX 1.600 Amplifier New Alpine PDX 1.600 Amplifier Paypal 0 Bid US $419.80 19h 18m
ALPINE PDX-4.100 4 3 2 CHANNEL CAR AMP PDX AMPLIFIER 08 ALPINE PDX-4.100 4 3 2 CHANNEL CAR AMP PDX AMPLIFIER 08 Paypal US $284.00 1d 6h 3m
NEW ALPINE PDX-1.600 MONO CHANNEL CAR AMPLIFIER CH/AMP NEW ALPINE PDX-1.600 MONO CHANNEL CAR AMPLIFIER CH/AMP Paypal US $306.99 1d 12h 44m
ALPINE PDX-5 5 CHANNEL 600W CAR AMPLIFIER AMP/CH PDX5 ALPINE PDX-5 5 CHANNEL 600W CAR AMPLIFIER AMP/CH PDX5 Paypal US $373.00 1d 12h 45m
NEW ALPINE PDX-1.600 CAR AUDIO MONO AMPLIFIER AMP 600W NEW ALPINE PDX-1.600 CAR AUDIO MONO AMPLIFIER AMP 600W Paypal US $263.95 2d 4h 6m
ALPINE PDX 1.1000 CAR AUDIO AMPLIFIER/AMP MONO CLASS-D ALPINE PDX 1.1000 CAR AUDIO AMPLIFIER/AMP MONO CLASS-D Paypal US $464.50 2d 4h 23m
ALPINE PDX-4.150 CAR AUDIO AMPLIFIER/AMP 4 CH PDX4150 ALPINE PDX-4.150 CAR AUDIO AMPLIFIER/AMP 4 CH PDX4150 Paypal US $399.50 2d 4h 23m
   1
Powered by phpBay Pro
Related Articles
No comments currently exist for this post.

Why don't you make one?

Get a GravatarLeave a Reply

Name: « Required

Email Address: « Required

Website URL: « Optional

You can use these tags:
<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>